Starting and Stopping with the Remote Control

Remote start

1. Locate your remote. (Fig. 1)
2. The key switch must be in the “on” position to use the remote for starting or stopping. (Fig.2)
3. Pull the choke button on the dash board. (Fig.3)
4. On the remote press  the lightning bolt button (Fig.4) to start the engine.
   NOTE: If the go kart was turned off by the remote, on the remote:  you must press the lightning bolt (Fig. 4) twice to start the engine, or press  the lock/unlock button (Fig. 5) one time and then press the lightning bolt (Fig. 4)  to start the engine.

Remote stop

1. When running the go kart press the lock/unlock button (Fig. 5) and hold until the engine is turned off.
   NOTE: Maximum distance of remote operation is 350ft.
2. If the go kart was turned off by the remote, you must first press the lock/unlock button (Fig. 5) to unlock it, and then press the lightning bolt button (Fig.4) to start. Or you can press the lightning bolt button (Fig.4) two times. Once to unlock, once to start.